Raised Tire Change Ramp,Large RV Camper Levelers with 6" Lift, Dual Axle Tandem Wheel AidCurved Design for Tire Change of RV/Camper/Travel Trailer with Chocks, Anti-Slip Mats, Carrying Bag,(1 Pack)

About this item

• HEAVY-DUTY HDPE WITH UV PROTECTION — RATED FOR 35,000 LBS — Solid high-density polyethylene reinforced with structural fiber and UV-treated to resist sun damage and cracking. Tires up to 32 inches fit the curved cradle. Built dense and rigid — not a lightweight ramp that flexes under load. One buyer measured the actual lift at roughly 7 inches at the high end of the arc; the usable leveling range is approximately 1 to 6 inches depending on where the tire sits.
• DRIVE ON, CHOCK, DONE — NO STACKING BLOCKS — Position the ramp under the low-side tire, drive forward until the trailer reads level, and lock the chock behind the wheel. No guessing how many plastic blocks to stack. No wood planks sinking into soft ground. No crawling underneath with a jack. One continuous motion replaces the entire block-stacking routine.
• GEAR MESH AND RUBBER PAD — DOUBLE ANTI-SLIP GRIP — The underside of the ramp uses a toothed gearwheel mesh that bites into gravel, dirt, concrete, and asphalt. A separate thick rubber anti-slip mat goes under the ramp for extra traction on slick surfaces like wet pavement or smooth garage floors. The steeper approach angle of a 6-inch ramp means solid ground contact matters — these two surfaces work together to hold position as the tire rolls on.
• WHAT'S IN THE BOX — ONE RAMP, FULL KIT — One curved leveling ramp, one matching wheel chock, one anti-slip rubber mat, and one carry bag with handles. For a single axle trailer, one ramp placed under the low side is all you need. For tandem axle trailers, measure the clearance between your tires before ordering — this ramp requires space between wheels to slide into position. If the gap is too tight, a shorter ramp may be the better option. A second ramp can be purchased separately for the opposite tire if needed.
• USE FOR LEVELING, TIRE CHANGES, AND BEARING WORK — Level the camper on an uneven campsite. Lift one tire off the ground to change a flat on a loaded horse trailer. Raise a wheel for bearing greasing without crawling under the axle with a jack. The ramp supports the full weight of the trailer with the tire seated in the curved cradle and the chock locked behind it. One ramp handles all three jobs.

Overview

• Color: Yellow & Black
• Vehicle Service Type: Camper, RV Camper Trailer, Trailer
• Material: Nylon polymer
• Brand: Gute
• Item dimensions L x W x H: 6.8 x 6.8 x 17 inches
• Item Weight: 3.1 Kilograms
• Is Foldable: No
• Load Capacity: 35000 Pounds
• Mounting Type: Hold
• Automotive Fit Type: Universal Fit