Professional Brake Line Flaring Tool Kit - 45 Degree Single, Double and Bubble Flares Pipe Flare Tool for 3/16", 1/4", 5/16", 3/8" Brake Repair Brake Flaring Tools Brake Line and Tubing Flaring Tool - size: 45 Degree Brake Line Flaring Tool Kit

About this item

• ➤PROFESSIONAL BRAKE FLARING TOOL: Angchun brake Line flaring tool kit can be used to create 45-degree single, double and bubble brake flares on stainless steel, steel and some soft metal tubing like copper. This brake line flare tool kit makes short work of making tubing into a standard 45 degree single flare, bubble flare or double flare. Great for making perfect flares on brake lines, transmission cooler lines and fuel lines. Easy and quick operation will save you time and money when creating brake lines on your project.
• ➤WIDE APPLICATION: Angchun brake line flaring tool with dies for 3/16”, 1/4”, 5/16”, 3/8” tubing, is designed for brake, fuel, transmission, and coolant lines to make a single flare, bubble flare and double flare. A MUST-HAVE Tool can be used on various common materials, such as stainless steel, mild steel, copper, aluminum, PVC, etc
• ➤EASY TO USE: 1. Firmly installing the tool to the vise; 2. Cutting tube with the pipe cutter to obtain a flush opening, then remove burrs inside and outside the opening; 3. Pull out the pins of the tool and pull up the clamp, put in half of the die blocks corresponding to the size of the pipe, and then put in the pipe (the pipe opening is flush with the OP.0 of the turntable);4. Put in the other half of the die blocks of the same size, put down the clamp and push in the pins to lock, and use the T handle to screw until it is still a little loose (make sure that the tube can be pushed when the OP.0 step is aligned); 5. Turn the handle;
• ➤STABLE PERFOEMANCE: When making automotive brake lines, the professional brake line flare tool kit can add a flare at the end of the brake line (to make the line wider) to make a leak-free connection without the need for long hours of hand cramping or twisting practice
• ➤WHAT U GET: Brake Line Flaring Tool Body (Vise Mounted); 4 Types of Split Dies: 3/16"(4.75mm), 1/4"(6.35mm), 5/16"(8mm) and 3/8"(9.5mm); Rotating Handle; Long Lever Handle; Pipe Cutter; Instruction Manual; Plastic Suitcase.
• ➤TIPS for USE: Before doing a flare, deburr the inside and outside of the tubing to ensure that metal shavings and impurities are removed from the inside and outside of the tubing. Then, apply a small amount of anti-seize to the end of the cut tubing to prevent problems when squeezing. Also, it can be added a little oil to the flaring cones (OP.1 and OP.2). Finally, it is a matter of taking care to put the appropriate fittings on the ends of the tubing, with the flared ends facing outward.