Metal Epoxy Repair System for Aluminum & Metal, 2-Part Cold Weld Load-Bearing Waterproof, Oil & Heat Resistant 392°F, Drillable Sandable Paintable, 30-Min Working Time 1.69 oz

About this item

• 1. METAL EPOXY REPAIR SYSTEM FOR PARTS THAT MUST HOLD — AOJEL S300 is a 2-part cold-weld style metal epoxy for prepared aluminum, steel, stainless steel, cast iron, cast aluminum, brackets, housings, pipe fittings, tools, frames, and other non-flexing metal repairs that need to hold after cure.
• 2. 30-MIN WORKING TIME FOR CONTROL, ALIGNMENT & THICKNESS — At 77°F / 25°C, S300 gives up to 30 minutes to position, align, clamp, fill gaps, and build repair thickness before initial set. Built for controlled repairs you do not want to redo — not rushed quick patches.
• 3. BUILD A HARD-CURE REPAIR BODY, NOT A THIN COAT — Do not just cover the visible crack line. Spread epoxy beyond the damaged area when possible and build enough thickness so the cured material becomes a solid repair body.
• 4. COLD-WELD STYLE REPAIR WHEN WELDING IS NOT PRACTICAL — No flame. No sparks. No welding setup. Use on clean, roughened, non-flexing metal areas; reinforce stress points with a metal patch, mesh, clamp, or bracket when needed.
• 5. WATERPROOF, OIL-RESISTANT & 392°F HEAT RESISTANT AFTER CURE — Built for prepared rigid metal repairs exposed to moisture, routine oil contact, workshop heat, vibration, and maintenance conditions after full cure.
• 6, DRILLABLE, SANDABLE, FILEABLE & PAINTABLE — After full cure, the hard repair body can be drilled, sanded, filed, shaped, and painted when mixed thoroughly and built to enough thickness.
• 7, MADE FOR REAL RIGID METAL REPAIR AREAS — Use on aluminum brackets, cast aluminum housings, steel frames, cast iron parts, stainless fittings, pipe fittings, cracked castings, stripped bolt or thread holes, and non-pressure oil pan exterior areas after proper prep.
• 8, PREP SURFACE, DISPENSE EVENLY & MIX 1:1 — Remove oil, rust, paint, dust, moisture, and loose material. Roughen smooth metal for stronger mechanical grip. Dispense a small test amount until both parts flow evenly, then mix Part A and Part B at a true 1:1 ratio until fully uniform.
• 9, CLAMP, REINFORCE & LET IT FULLY CURE — Align and clamp before cure. For stress points or load-bearing rigid repairs, reinforce with a metal patch, mesh, clamp, or bracket when needed. Wait 24 hours before loading, drilling, sanding, painting, or stress-testing.
• 10, FOR RIGID MATERIALS ONLY — Not for PE, PP, PTFE, silicone, rubber-like materials, soft plastics, flexible joints, moving parts, bending or torsion-loaded surfaces, fuel lines, brake systems, exhaust manifolds, internal engine cracks, or pressure-critical repairs.

Overview

• Brand: AOJEL
• Specific Uses For Product: Metal Repair
• Material: Epoxy
• Item Form: Epoxy
• Special Feature: Load-Bearing, Waterproof, Heat Resistant to 392°F, Drillable After Cure, Longer Working Time Compatible Materials: Metal, Aluminum, Cast Iron, Stainless Steel Finish After Cure: Drillable, Sandable, Fileable, Paintable Recommended Uses: Rigid structural repair for brackets, housings, frames, tools, pipes, fittings Load-Bearing, Waterproof, Heat Resistant to 392°F, Drillable After Cure, Longer Working Time Compatible Materials: Metal, Aluminum, Cast Iron, Stainless Steel Finish After Cure: Drillable, Sandable, Fileable, Paintabl… See more