JIFETOR Pneumatic Vacuum Brake Bleeder Kit Clutch Oil Bleeding Tool Set | 1.75L Waste Brake Fluid Extractor, 0.9L New Oil Refilling Bottle, 2 Silicon Hoses and Universal Rubber Adapter

About this item

• One-man Pneumatic Handfree Operation: The large-capacity brake fluid extractor(1.75 L) and refill bottle(0.9 L) allows easy single oil change on normal vehicles. The inverted refill bottle can be securely held without hand support at the mouth of the brake fluid reservoir; and the extractor is driven by standard shop air(required air compressor/vacuum pump is not provided) and there is a fixing ring to perform hands-free constant fluid suction, making the messy tiring brake job easy to complete
• Brake Vacuum Bleed Tool: 1.75 L fluid extractor features 1/4" American air plug and a noise-reducing silencer, which keeps the noise to a minimum when the fluid flows into the liquid extractor through the drain hose for a quieter hydraulic work. Two 1.8 m (70-7/8") corrosion-resistant silicone hoses included, one with black suction nipple for connecting brake caliper screw to suck out the old brake fluid, and one with narrow pipe for inserting into other system to extract out the residual old oil
• Brake Fluid Refiller: Vacuum brake bleeder kit comes with a thickened 0.9 L fluid refill bottle with clear scale(from 100 ml to 900 ml), adopting inclined nozzle, switch valve, and swivel clamp with adjustable screw for fast refueling. Fully open the switch valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port. No need to keep an eye on it. But if 0.9 L is not enough, remember to add new oil in time
• Easy Work: 1.75 L air-driven brake bleeder extractor with 0.9 L refill bottle, while work with powerful air compressor (more than 4 CFM), will show you a safe and efficient fluid renewing on your vehicles. Install the refill bottle (with right amount of new brake fluid inside), connect the extractor to brake caliper and air source, then turn them on to suck old fluid out and direct new oil to fill the entire brake system. Attention: Always keep the reservoir with fluid inside to keep the air out
• Accessory Part: There are a spare black suction nipple with matched barbed connector and a European air plug in the brake bleeding tool set for more choice