FOXWELL NT630 Plus OBD2 Scanner with ABS and SRS, ABS Auto Bleed, 4 Resets | Brake Code Reader, ABS Bidirectional Scan Tool, Oil EPB SAS Check Engine Light, Live Data, No Subscription, WiFi Update

About this item

• More Than Just a Code Reader - Access enhanced ABS & SRS diagnostics with ABS auto bleed, supported ABS module active tests, and essential maintenance reset functions. Read and clear ABS codes AFTER the root cause is repaired or related faults are fixed, view live data, and help identify sensor, wiring, or module-related faults. Update via Wi-Fi with no subscription required. Note: Function coverage varies by vehicle brand, model, and year and some may require vehicle-specific guidance. Please confirm compatibility with the related functions before purchase. Provide your vehicle details through Amazon Message Center before proceeding
• ABS Auto Bleed for Brake Service - FOXWELL NT630 Plus helps activate supported ABS pumps and valves to remove trapped air after brake service, fluid replacement, caliper work, master cylinder replacement, or ABS-related repair and restore a firmer pedal feel. Your vehicle must support automatic ABS bleeding. If not supported, please perform manual bleeding instead. ABS auto bleed is NOT compatible with all vehicles. Please provide VIN, year, make, model, and engine size to verify ABS bleed support before purchase and let us know if you encounter any operational issues
• Diagnose ABS Warning Lights with Bidirectional Control - Unlike basic scanners, this scan tool offers enhanced ABS diagnostics with supported ABS module bidirectional control. This ABS scanner diagnostic tool helps diagnose ABS warning lights, wheel speed sensor issues, wiring faults, hydraulic imbalance symptoms, and ABS module-related problems. View freeze frame and 2-in-1 dynamic graphs of live data for more informed troubleshooting. Available ABS active tests and data vary by vehicle. Note: The device does NOT support ABS coding or relearn procedures
• Know Before You Buy - ABS auto bleed only works on vehicles that support automated bleeding through the ABS module. SRS/airbag crash data clearing, airbag module reset, component matching, and programming are NOT supported. 24V vehicles, motorcycles, CCD protocol vehicles, V12/DB11 engines, BMS, EPS, transmission diagnostics, coding, and other system scans are NOT supported. Please verify compatibility before purchase
• Wi-Fi updates and DIY Cost Savings - With a 2.8" LCD screen, clear menus, step-by-step guidance, and Wi-Fi updates, NT630 Plus is easy to use even for first-time scanner users. Simply plug into the vehicle's 16PIN OBD port for plug-and-play without extra power supply. No phone app or subscription is needed for everyday checks. Built with sturdy materials and a hard carrying case, it is a practical tool for home garages and DIY users before visiting a repair shop
• No Registration Required - Please refer to the Quick Start Guide for Wi-Fi update instructions. No Windows computer is required. The car scanner is set up for easier update access. If you need help with Wi-Fi updates, account linking, or registration status, please contact us via Amazon Message
• Check Engine Light with Live Data & Code Definitions - Diagnose check engine light issues, read and clear generic OBD-II codes, view 2-in-1 graph of live engine data such as RPM, coolant temperature, fuel trim, and sensor readings, and understand codes with built-in plain-English DTC definitions. Standard OBD-II 16-pin interface for 12V vehicles. NOTE: Supports universal OBD-II emission-related functions only; does NOT support advanced engine system diagnostics
• Pay Only for the Services You Need - One NT630 Plus is enough! This car obd scanner will perform daily reset services like ABS light reset, SAS(Steering Angle Sensor) adjustment, Oil light reset(NO oil life reset), etc... The error light or codes will reset after the car’s faults are repaired. Tip: Service coverage varies by make/model, please confirm BEFORE purchasing

Overview

• Brand: FOXWELL
• Power Source: Auto Bleed function is supported only on the right side for CHRYSLER/JEEP/DODGE vehicles, the left side requires manual bleed. Auto Bleed function is supported only on the right side for CHRYSLER/JEEP/DODGE vehicles, the left side requires manual bleed.
• Product Dimensions: 9.84"L x 2.36"W x 17.72"H
• Operating System: NOTE: NOT support CCD protocol. NOT support programming. NOT work on the vehicles that itself can not do the abs auto bleed function. NOTE: NOT support CCD protocol. NOT support programming. NOT work on the vehicles that itself can not do the abs auto bleed function.
• Screen Size: 2.8 inches