{"product_id":"metal-epoxy-repair-system-for-aluminum-metal-2-part-cold-weld-load-bearing-waterproof-oil-heat-resistant-392-f-drillable-sandable-paintable-30-min-working-time-1-69-oz","title":"Metal Epoxy Repair System for Aluminum \u0026 Metal, 2-Part Cold Weld Load-Bearing Waterproof, Oil \u0026 Heat Resistant 392°F, Drillable Sandable Paintable, 30-Min Working Time 1.69 oz","description":"\u003ch3\u003eAbout this item\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1. METAL EPOXY REPAIR SYSTEM FOR PARTS THAT MUST HOLD — AOJEL S300 is a 2-part cold-weld style metal epoxy for prepared aluminum, steel, stainless steel, cast iron, cast aluminum, brackets, housings, pipe fittings, tools, frames, and other non-flexing metal repairs that need to hold after cure.\u003c\/li\u003e\n\u003cli\u003e2. 30-MIN WORKING TIME FOR CONTROL, ALIGNMENT \u0026amp; THICKNESS — At 77°F \/ 25°C, S300 gives up to 30 minutes to position, align, clamp, fill gaps, and build repair thickness before initial set. Built for controlled repairs you do not want to redo — not rushed quick patches.\u003c\/li\u003e\n\u003cli\u003e3. BUILD A HARD-CURE REPAIR BODY, NOT A THIN COAT — Do not just cover the visible crack line. Spread epoxy beyond the damaged area when possible and build enough thickness so the cured material becomes a solid repair body.\u003c\/li\u003e\n\u003cli\u003e4. COLD-WELD STYLE REPAIR WHEN WELDING IS NOT PRACTICAL — No flame. No sparks. No welding setup. Use on clean, roughened, non-flexing metal areas; reinforce stress points with a metal patch, mesh, clamp, or bracket when needed.\u003c\/li\u003e\n\u003cli\u003e5. WATERPROOF, OIL-RESISTANT \u0026amp; 392°F HEAT RESISTANT AFTER CURE — Built for prepared rigid metal repairs exposed to moisture, routine oil contact, workshop heat, vibration, and maintenance conditions after full cure.\u003c\/li\u003e\n\u003cli\u003e6, DRILLABLE, SANDABLE, FILEABLE \u0026amp; PAINTABLE — After full cure, the hard repair body can be drilled, sanded, filed, shaped, and painted when mixed thoroughly and built to enough thickness.\u003c\/li\u003e\n\u003cli\u003e7, MADE FOR REAL RIGID METAL REPAIR AREAS — Use on aluminum brackets, cast aluminum housings, steel frames, cast iron parts, stainless fittings, pipe fittings, cracked castings, stripped bolt or thread holes, and non-pressure oil pan exterior areas after proper prep.\u003c\/li\u003e\n\u003cli\u003e8, PREP SURFACE, DISPENSE EVENLY \u0026amp; MIX 1:1 — Remove oil, rust, paint, dust, moisture, and loose material. Roughen smooth metal for stronger mechanical grip. Dispense a small test amount until both parts flow evenly, then mix Part A and Part B at a true 1:1 ratio until fully uniform.\u003c\/li\u003e\n\u003cli\u003e9, CLAMP, REINFORCE \u0026amp; LET IT FULLY CURE — Align and clamp before cure. For stress points or load-bearing rigid repairs, reinforce with a metal patch, mesh, clamp, or bracket when needed. Wait 24 hours before loading, drilling, sanding, painting, or stress-testing.\u003c\/li\u003e\n\u003cli\u003e10, FOR RIGID MATERIALS ONLY — Not for PE, PP, PTFE, silicone, rubber-like materials, soft plastics, flexible joints, moving parts, bending or torsion-loaded surfaces, fuel lines, brake systems, exhaust manifolds, internal engine cracks, or pressure-critical repairs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eOverview\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e AOJEL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific Uses For Product:\u003c\/strong\u003e Metal Repair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Epoxy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem Form:\u003c\/strong\u003e Epoxy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Feature:\u003c\/strong\u003e Load-Bearing, Waterproof, Heat Resistant to 392°F, Drillable After Cure, Longer Working Time Compatible Materials: Metal, Aluminum, Cast Iron, Stainless Steel Finish After Cure: Drillable, Sandable, Fileable, Paintable Recommended Uses: Rigid structural repair for brackets, housings, frames, tools, pipes, fittings\nLoad-Bearing, Waterproof, Heat Resistant to 392°F, Drillable After Cure, Longer Working Time Compatible Materials: Metal, Aluminum, Cast Iron, Stainless Steel Finish After Cure: Drillable, Sandable, Fileable, Paintabl… See more\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Brand: AOJEL","offers":[{"title":"Default Title","offer_id":40835608739969,"sku":"B0FPBRQRMV","price":32.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0607\/5754\/0993\/files\/51kAYCG0K1L.jpg?v=1784853437","url":"https:\/\/garagenest.us\/products\/metal-epoxy-repair-system-for-aluminum-metal-2-part-cold-weld-load-bearing-waterproof-oil-heat-resistant-392-f-drillable-sandable-paintable-30-min-working-time-1-69-oz","provider":"GarageNest","version":"1.0","type":"link"}